Easy Interactive Tools
With a computer, you can use Easy
Interactive Tools. This software lets you use
the interactive pens as a mouse to annotate,
save, and interact with content from
your computer.
SMART Notebook
With a computer, you can use SMART
Notebook software to create and save
interactive slides and presentations. You can
create and play interactive formative games
with the class, or share them to student
devices. SMART Notebook can be added to
your computer through Filewave. Contact
Helpdesk if you need assistance.
Command toolbar
Built-in Toolbar
Without a computer, you can use the
toolbar that is built into the projector
(PC Free Annotation). This lets you
annotate images from a document
camera, tablet, DVD player, or other
source connected to your projector
.
v Students and colleagues can
connect their own laptops and
annotate on the fly using the built-in
toolbar, without installing software.
Choosing the Right Tool
If you already have annotation software, you can use it
with your BrightLink projector. If you are using Microsoft
®
Office 2003 or later, you can also use the “inking tools”
to add handwritten notes to your documents and
PowerPoint
®
presentations.
Here are some tips on choosing from the tools that came
with your BrightLink projector:
Built-in
Toolbar
Easy
Interactive
Tools
No computer?
Use pen as a mouse
Use the board to draw
on computer content
Draw on board using
the computer
Save annotations as a
JPEG
Save annotations in
image, PDF, or editable
format
Using the Remote Control
Select from various
image sources
connected to the
projector
Turn projector
on/off
Access menu
system for additional
adjustments
Calibrate
Temporarily
turn off image
and sound
Page through
documents
Switch between
PC Interactive and
PC Free Annotation
Zoom in and out
Stop video action
Display Home screen
Enter
For more information on using the remote control:
•
See the online BrightLink User’s Guide
•
Watch a video or two at
www.epson.com/brightlinkvideos (U.S.) or
www.epson.ca/brightlinkvideos (Canada)
Need Help?
Telephone Support
The Epson
®
PrivateLine
®
service is for you!
All you have to do is call (800) 637-7661. This service is
available for the duration of your warranty period.
You may also speak with a projector support specialist by
dialing (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).
Support hours are 6 am to 8 pm, Pacific Time, Monday
through Friday, and 7 am to 4 pm, Pacific Time, Saturday.
Days and hours of support are subject to change without
notice. Toll or long distance charges may apply.
Online Support
To access the online User’s Guide, get FAQs, and more,
visit www.epson.com/brightlinkdownloads (U.S.) or
www.epson.ca/brightlinkdownloads (Canada) and
select your product.
EPSON is a registered trademark and EPSON Exceed Your Vision is a registered
logomark of Seiko Epson Corporation. BrightLink and PrivateLine are registered
trademarks of Epson America, Inc.
Mac is a trademark of Apple Inc., registered in the U.S. and other countries.
General Notice: Other product names used herein are for identification purposes
only and may be trademarks of their respective owners. Epson disclaims any and
all rights in those marks.
This information is subject to change without notice.
© 2016 Epson America, Inc., 9/16 CPD-50682
Printed in XXXXXX
Calibration
Calibration coordinates the position of the pen with the
location of your cursor. If the pen position and cursor
location don’t match, you can perform auto calibration, or
you can calibrate manually for even greater accuracy. You
don’t need a computer, and you won’t need to calibrate
again unless the projector or image is moved, or the
image is resized.
1
To start pen calibration, press the User button on
the remote control, or press the Home button on the
remote control and select Auto Calibration.
2
When you see the Auto Calibration screen, do one of
the following:
• Press to run auto calibration, then wait until
calibration is complete.
• Select No, then press and follow the steps
below to calibrate manually.
3
Select Manual Calibration, then press .
4
When you see the Manual Calibration screen, press
to select Yes.
5
Touch the center of the circles on the screen with
your pen to perform manual calibration.
Star
t Here
Follow the steps to get started with your BrightLink
projector:
1
Connecting your computer
2
Installing interactive software
3
Interacting with the screen
4
Using the built-in toolbar
BrightLink Interaction
The BrightLink interactive pens turn any wall or table into
an interactive area, with or without a computer.
The projector control toolbar lets you control the projector
from the screen just as you would using the remote
control.
BrightLink
®
685Wi
Drawing toolbar
To Next Page
Need help?
General
Weight and Dimensions
