6
1 Package Contents
Touch Unit
The following parts are packaged with your projector and are necessary when attaching the Touch Unit. When
installing the Touch Unit on a non-magnetic screen or whiteboard, you will also need three M4 screws.
Touch Unit Bracket
The following parts are packaged with your projector and are necessary when attaching the Touch Unit above
the frame of a whiteboard. When installing the installation plate, you will also need three (3) M4 wood screws
or M4 anchor bolts (not included).
Tape (approx. 2.4 inches
[6 cm]) for securing the
markers (×12)
Label (×4)
Touch Unit
Touch Unit connection cable
Infrared deflector (approx.
11.2 inches [28.5 cm]) (×8)
Spacer for screw hole (×3)
Marker (x2)
Installation plate
M4 × 12 mm hexagon
socket head cap bolt (×2)
M4 × 25 mm hexagon
socket head cap bolt (×2)
Securing plate
M4 × 55 mm and M4 × 70 mm
hexagon socket head cap bolts
To Next Page
Loading...
