Epson brightlink Quick Start Guide

If you need to install the Easy Interactive Tools
software
Do one of the following:
• Use the CD that came with the projector, labeled
“EPSON Projector Software for Easy Interactive
Function”
• Download the most up-to-date version from:
epson.com/brightlinkdownloads (U.S.)
epson.ca/brightlinkdownloads (Canada)
global.latin.epson.com/soporte (Latin America;
site available in Spanish)
For more information about Easy Interactive Tools, see
the online Easy Interactive Tool Tips sheet or the online
BrightLink User’s Guide.
2 Make Sure Interactive Software Is Installed
3 Calibrate
5
Display an image from your computer. If the image
doesn’t appear, try one of the following:
• On some Windows laptops, you may need to
hold down the Fn key on the keyboard and press
F7 or the function key that lets you display on
an external monitor. It may have an icon such as
, or it may be labelled CRT/LCD.
• On a Mac, you may need to open System
Preferences and select Displays. Select the
display or Color LCD option if necessary, then
click the Arrange or Arrangement tab, and
select the Mirror Displays check box.
• Try pressing the Source Search button on the
remote control.
1 Connect Your Computer and
Turn on the Projector
You may already have interactive software on your
computer, or you may need to install it. For
OS X, you need Easy Interactive Driver and Easy
Interactive Tools (or other interactive software). For
Windows, you only need Easy Interactive Tools (or other
interactive software).
Here’s how to find out if the Easy Interactive Tools
software is installed on your computer:
If you are using a Mac:
Look for the Easy Interactive Driver and Easy Interactive
Tools folders in the Application folder on your hard drive.
If you see these folders, the Easy Interactive software is
installed.
If you are using Windows:
Windows 8.x
Navigate to the Apps screen and select Easy Interactive
Tools.
All other versions
Select or Start > All Programs or Programs >
EPSON Projector > Easy Interactive Tools Ver. 3.
If you see Easy Interactive Tools Ver. 3, the software is
installed.
If the software is not installed, follow the steps in the next
column to install it.
Calibration coordinates the position of the pen with the
location of your cursor. If the pen position and cursor
location don’t match, you can try auto calibration, or you
can calibrate manually for even greater accuracy. You
don’t need a computer, and you won’t need to calibrate
again unless the projector or image is moved, or the
image is resized.
1
To start calibration, press the User button on the
remote control.
2
When you see the Auto Calibration screen, do one
of the following:
• Press to try auto calibration, then wait until
calibration is complete.
• Select No, then press and follow the steps
below to calibrate manually.
3
Press the Menu button on the remote control, select
the Extended menu, and press .
4
Select the Easy Interactive Function setting and
press .
5
Select Manual Calibration, then press .
6
When you see this screen, press to select Yes.
7
Touch the circles on the screen to perform manual
calibration.
For more detailed instructions, see the online BrightLink
User’s Guide.
Using the Remote
Control
Select from various
image sources
connected to the
projector
Switch between
computer and Easy
Interactive Pen
Enter
Zoom in and out
Stop video action
Turn projector
on/off
Access menu
system for
additional
adjustments
Calibrate
Page through
documents
Temporarily
turn off image
and sound
For more information on using the remote control and
cool time-saving buttons:
• See the online BrightLink User’s Guide.
• Go to the training section and watch a video or two at
epson.com/brightlinkvideos (U.S.) or
epson.ca/brightlinkvideos (Canada).
1
Connect the USB cable from the projector’s USB
TypeB port directly to any available USB port on
your computer.
USB cable
2
Connect an HDMI or VGA cable from the projector to
your computer.
HDMI
VGA
3
Turn on the projector by pressing the blue power
button on the remote control.
In Windows
®
, you may see messages about device
drivers or new hardware.
4
The default language of the menu system is English.
To select another language, press the Menu button
on the remote control. Select Extended and press
. Select Language and press . Select your
language and press . Press the Menu button to
exit the menu system.

Epson brightlink Specifications

General

Display Technology	3LCD
Resolution	WXGA (1280 x 800)
Interactive Features	Yes
Lamp Life	Up to 10, 000 hours (ECO mode)
Connectivity	HDMI, USB, VGA, LAN
Wireless	Optional
Operating Temperature	5° to 35° C
Operating Humidity	20 - 80%