• TeamBoard Draw, a more intermediate level
annotation program, is included with your projector.
You can install it from the CD that came with your
BrightLink, or download it from the Epson website at
epson.com/brightlinkdownloads (U.S.) or epson.
ca/brightlinkdownloads (Canada).
You will need Internet access and your product serial
number to download TeamBoard Draw. Press the Menu
button on the remote control and select the Info menu to
see your serial number. (For BrightLink Solo, the serial
number is on the arm of the interactive module.)
For more information, see the TeamBoard Draw Tips
sheet in this Welcome Kit or the TeamBoard videos on
your DVD.
Easy Interactive Driver allows you to use the BrightLink
pen as a mouse. For annotating, you need additional
software. If you already have annotation software, you
can use it with BrightLink.
You can also use one of the following:
• Easy Interactive Tools (EIT), free from Epson, is a
basic annotation program available for download from
the Epson website. Click the link on your desktop or
go to epson.com/brightlinkdownloads (U.S.) or
epson.ca/brightlinkdownloads (Canada).
Interactive mode Whiteboard mode
For more information, see the Easy Interactive Tools Tips
sheet in this Welcome Kit or the BrightLink User’s Guide.
EPSON and BrightLink are registered trademarks and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation.
BrightLink Solo is a trademark and PrivateLine is a registered trademark of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights
in those marks.
This information is subject to change without notice.
© 2012 Epson America, Inc. 2/12 CPD-36471
Printed in USA
5 Explore Additional Software Options
To Next Page
Loading...
Need help?
General
