53
Chapter 2 Setup
Setup using a Computer connected with a USB Cable
Prepare the following items.
• Computer: Windows 11/10/8.1/8/7
• USB cable: With a Type B connector required for connecting to the printer
• Setup utility: TM-L100 Utility
1
Connect the wireless LAN unit to the printer.
2
Connect the printer to the computer with a USB cable.
3
Turn on the computer.
4
Turn on the printer.
5
Start TM-L100 Utility.
6
Select the printer and click [OK].
If the printer does not appear, click the [Add Port] button to add the USB-connected printer.
7
Use the [Network] menu to configure the network settings.
For details on the settings, please refer to the TM-L100I Utility manual.
8
After completing the settings, turn off the printer.
Network settings of the printer is completed.
To Next Page
Loading...
