54
Chapter 2 Setup
Setup using a Computer connected using SimpleAP
Prepare the following items.
• Computer: Windows 11/10/8.1/8/7 (A computer with wireless LAN capability)
• Setup utility: TM-L100 Utility
1
Connect the wireless LAN unit to the printer.
2
Turn on the computer.
3
Start the printer in the SimpleAP mode.
The printer prints SSID and QR code.
"SimpleAP mode" on page 52
4
Start TM-L100 Utility.
5
Connect the printer using SimpleAP.
Select [Add Port] - [Network], and then click [Connect with SimpleAP] to add the printer.
6
Use the [Network] menu to configure the network settings.
For details on the settings, refer to the TM-L100 Utility manual.
7
After completing the settings, turn off the printer.
Network settings of the printer is completed.
To Next Page
Loading...
