10 TM-C3400 User’s Manual
English
5. Complete the installation by following the instructions displayed.
Network settings are also processed during the installation.
Setting DIP Switches
When you open the ink cartridge cover and remove the DIP switch
cover, you will find the DIP switches. Set the DIP switches, using the
tip of a tool, such as a small screwdriver. Change settings when the
printer is off.
SW Function ON OFF
1 Operation of the power switch Reset Power on/off
2 Internal use Fixed to OFF (Do not change.)
3 Paper selection Fanfold paper Roll paper
7 Internal use Fixed to OFF (Do not change.)
8 Buzzer volume High Low
Cable hook: prevents the cable from falling off.
To Next Page
Loading...
Need help?
General