6 TM-C3400 User’s Manual
English
Power LED
Lights when the power is on, and is off when the power is off.
Flashes when the printer is operating (i
nitializing, head cleaning, or
printing) or in an error state.
Error LED
Lights or flashes when the printer is offline, and is off when the printer
is online.
Ink LED
Flashes when ink is low or waste ink in the ink cartridge is nearly full.
Lights when it is time to replace the
ink cartridge, when the ink
cartridge is not installed or is not correctly installed, and when waste
ink in the ink cartridge is full.
Off when ink in the ink cartridge is adequate.
Paper LED
Lights when the paper is not installed or is not correctly installed.
Off when the paper is correctly installed.
Cut button
Cuts the paper.
FEED button
Feeds the paper.
Setup
Follow in order the steps below to set up the printer.
1. Installing the printer (See page 7.)
2. Connecting the AC cable (See page 7.)
3. Installing the ink cartridge (See page 8.)
4. Installing the printer driver and
connecting the printer to the
computer (See page 9.)
5. Setting the DIP switches (See page 10.)
6. Installing the paper (See page 11.)
7. Attaching/adjusting the paper ejection tray (See page 19.)
To Next Page
Loading...
Need help?
General