13
Connecting the Interface Cable
Connect the interface cable to be used to the connector on the rear side of the printer.
(U
"Rear Side" on page 9)
!CAUTION:
When using a USB cable, pass the cable through the wire saddle to prevent accidental disconnection.
Installing the Ink Cartridge
Install the ink cartridge by following the steps below.
!CAUTION:
Read the handling instructions carefully before installing the ink cartridge.
(
U
"Cautions on the Ink Cartridge" on page 4, "Ink cartridge" on page 30)
1. Turn on the printer. (U
"Turning On" on page 10)
2. Open the ink cartridge cover.
To Next Page
Loading...
