30
Transporting the Printer
If you want to move your printer, you need to prepare it for transportation and
repack it in the original box. Follow these steps:
1. Turn on the printer and wait until the print head locks in the far right
position. Then turn off the printer.
Caution:
To avoid damage, always leave the ink cartridges installed when
transporting the printer.
2. Unplug the power cord from the electrical outlet. Then disconnect the
printer cable from the printer.
3. Remove any paper from the sheet feeder and remove the paper support.
4. Push in the output tray extensions and close the tray.
5. Repack the printer and attachments in the original box using the protective
materials that came with it. See the Unpacking Sheet that was packed with
the printer.
Be sure to keep the printer level as you transport it. If you notice a decline in print
quality after transporting the printer, clean the print head; if output is misaligned,
align the print head.
To Next Page
Loading...
