Epson CW-C4000e - Notification; Pause; Media Detection

❏ Do not cut (stop at the print end position)
Notication
❏ None (Initial setting)
❏ Beep at Cut
❏ Beep at Job End
❏ Beep at Collate End
Note
Regardless of the printer driver setting described above, the buzzer will not sound if the buzzer setting
of the printer is disabled.
Pause
❏ None (Initial setting)
❏ Pause at Cut
❏ Pause at Job End
❏ Pause at Collate End
Media Detection…
e initial setting of [Media Source] and [Media Detection] will change depending on the settings of the printer.
Media Source
❏ Supply from Inside (Roll Paper)
❏ Supply from Outside (Fanfold Paper)
❏ Supply from Outside (Roll Paper)
Media Detection
❏ Gap detection
❏ Black mark detection
❏ No detection
CW-C4000 Series User’s Guide
Basic Operation
39