Basic Operation
33
Media Definition
The size, form, type, and other settings of frequently used paper can be registered as a media definition. The
set media definition can be selected from the Media Name pull-down menu. This is convenient because you
will not need to set the paper settings of the driver when printing from an application if you register a media
definition in advance.
If you wish to set the paper size and other settings every time without registering a media definition, select
[Custom] from the [Media Name] pull-down menu on the [General] tab. The various settings on the
[General] tab will become available so that you can set the paper size and other settings.
Media Name
• 108 x 152.4 mm - Die-cut Label
*
(Initial setting)
• Custom
* : This setting is suitable for printing the roll paper included with the product.
Label Width
Can be specified from 21.4 to 211.9 mm
Label Length
Can be specified from 8 to 609.6 mm
Gap between Labels
When [Media Form] is other than [Continuous Label]
2 to 6 mm
Initial setting: 3 mm
When [Media Form] is [Continuous Label]
0 to 6 mm
Initial setting: 3 mm
To Next Page
Loading...
