Epson CW-C6550A - Page 34

Basic Operation
34
Media Form
• Die-cut Label (Gap) (Initial setting)
• Die-cut Label (BlackMark)
• Continuous Label
• Continuous Label (BlackMark)
Media Saving
Enabled only when [Continuous Label] is selected as the [Media Form].
• Eliminate Lower Margin
• Eliminate Lower and Upper Margin
• No Saving (Initial setting)
Media Coating Type
• Matte Paper (Initial setting)
• Synthetic
• Glossy Paper
• Glossy Film
• High Glossy Paper
Print Quality
When [Media Coating Type] is [Matte Paper] or [Synthetic]
• Max Speed
• Speed
• Normal (Initial setting)
• Quality
When [Media Coating Type] is [Glossy Paper], [Glossy Film], or [High Glossy Paper]
• Normal
• Quality (Initial setting)
• Max Quality
Q NOTE
If you change the [Media Coating Type], the [Print Quality] will automatically be set to the initial
setting suitable for the selected paper type.