Product Information 25
English
Chapter 5
Product Information
This chapter includes:
❏ Printer specifications
❏ Safety instructions
❏ Notices (Energy Star
®
compliance, FCC compliance statement,
Declaration of Conformity)
❏ Warranty
Printer Specifications
Electrical
Environmental
Printing method: 36-pin impact dot matrix (9 × 4, staggered)
Printing speed: High speed draft 1550 cps at 10 cpi
Draft 1320 cps at 10 cpi
NLQ 330 cps at 10 cpi
Printable columns: 136 columns (at 10 cpi)
Paper feed methods: Push tractor (front, rear)
Push and pull (front/rear) tractor; requires additional
tractor
Ribbon: Black ribbon cartridge S015384
Ribbon life approx. 15 million characters
(Draft, 10 cpi, 14 dots/
character)
Acoustic noise: Approx. 58 dB (A) (ISO 7779 pattern)
Interfaces: Standard bidirectional, 8-bit, parallel with IEEE 1284
nibble mode support
USB (ver 1.1)
Serial RS-232C
Slot for optional Type B
interface card
Control code
ESC/P, IBM PPDS emulation
Rated voltage range: 100 to 240 V
Input voltage range: 90 to 264 V
Rated frequency range: 50 to 60 Hz
Input frequency range: 49.5 to 60.5 Hz
Rated current: 4.8 A (maximum 14.5 A)
Power consumption: Approx. 185 W (ISO/IEC 10561 letter pattern)
Approx. 9.5 W in sleep mode
Temperature Humidity (without
condensation)
Operation (plain paper) 5 to 35°C (41 to 95°F) 10 to 80% RH
Operation (recycled paper,
envelope, label, or roll paper)
15 to 25°C (59 to 77°F) 30 to 60% RH
Storage –30 to 60°C (–22 to 140°F) 0 to 85% RH
To Next Page
Loading...
