100 Control Panel
Panel lock out
If a setting is set to Unlock, you can use the button, regardless of the panel
lock out mode. If a setting is set to Lock, you cannot use the button when
the printer is in the panel lock out mode.
Label left position 0 to 1440/120 (by 1/120 inch)
Label width 0 to 1440/120 (by 1/120 inch)
Base sheet PG position
number
0 to 14
Label paper PG position
number
0 to 14
Menu Values (default in bold)
Pause function Unlock, Lock
Micro Feed function Unlock, Lock
Load function Unlock, Lock
LF function Unlock, Lock
FF function Unlock, Lock
Top of Form function Unlock, Lock
Tear Off function Unlock, Lock
Font function Unlock, Lock
Pitch function Unlock, Lock
Front/Rear function Unlock, Lock
Menu function Unlock, Lock
Reset function Unlock, Lock
Menu Values (default in bold)