Options and Consumables 147
6
6
6
6
6
6
6
6
6
6
6
6
3. Tilt the tractor forward so that its pins rest on the metal frame
of the printer.
4. Load paper onto the rear tractor by following step3 through
10 of “Loading Paper onto the Rear Tractor” on page 22.
5. Then tilt the pull tractor back until the rear latches click into
place over the printer’s rear mounting pins.
6. Turn on the printer, and use the LF/FF Load button to advance
the paper to the pull tractor.
Now follow steps 4 through 11 of “Using the pull tractor with the
front tractor” on page 142.
To Next Page
Loading...
