Options and Consumables 155
6
6
6
6
6
6
6
6
6
6
6
6
2. Close the paper separator cover and position the output tray
on the output attachment to accommodate the page length of
paper you use:
You are now ready to use the perforation cutter as described in
the next section.
c
Caution:
❏ You cannot open the top cover while the perforated paper
output attachment and the output tray is attached. If you
want to open the top cover, you need to remove them first.
❏ When you are ready to reload the paper onto the rear tractor,
first remove the perforation cutter. See “Removing the
perforation cutter” on page 158 for instructions.
second step: 9 inches or less
third step: 10 to 11 inches
fourth step: 12 inches or more
output tray
To Next Page
Loading...
