25
Using the Network Interface Unit
See these sections to use the optional Epson Network Interface Unit to scan over a network.
Network Interface Unit Control Panel
Connecting the Network Interface Unit
Setting Up Network Scanning
Scanning to Network Computers from the Network Interface Unit - Windows
Network Interface Unit Control Panel
1
power button (turns the unit on and off)
2 LCD screen (displays status, operations, and error messages)
3
settings button (selects product settings, network settings, and maintenance options)
4
Reset button (returns the LCD to the default screen)
5
Stop button (cancels scanning)
6 OK button and arrows (use the arrows to highlight an option and the OK button to select it)
7 start button (starts scanning when networking is enabled)
Parent topic: Using the Network Interface Unit
To Next Page
Loading...
