38
Note: You can view or change the scan settings using Document Capture Pro (Windows) or
Document Capture (Mac).
Assigning Start Button Settings or Scan Jobs
Parent topic: Starting a Scan
Assigning Start Button Settings or Scan Jobs
You can view or change the default scan settings when you scan using the start button on your
scanner. You do this by accessing the scan jobs in the Document Capture Pro (Windows) or Document
Capture (Mac) program.
1. Start Document Capture Pro or Document Capture on a computer connected to the product.
2. Select Switch to Standard View, if necessary.
3. Click the Manage Job icon from the toolbar at the top of the window.
You see a window showing the current scan job list.
4. If you want to add a scan job, click Add or the + icon, enter a name for the new job, select settings
as necessary, and click OK.
You can now use the new scan job when you scan with Document Capture Pro or Document
Capture.
Note: See the Help information in Document Capture Pro or Document Capture for details.
5. If you want to assign a scan job to the start button, do one of the following:
• Windows: Click Event Settings.
• Mac: Click the icon at the bottom of the window, then click Event Settings.
6. Do one of the following:
• Windows: Select the job that you want to assign to the start button from the 1 drop-down list.
• Mac: Select the job that you want to assign to the start button.
7. Click OK.
Parent topic: Starting a Scan from a Scanner Button
To Next Page
Loading...
Need help?
General
Weight and Dimensions
