Roller Assembly Kit Codes
Parts (the pickup roller and a separation pad) should be replaced when the number of scans exceeds the service
number. You can check the latest number of scans in Epson Scan 2 Utility.
A: pickup roller, B: separation pad
Part name
Codes
*1
Life cycle
Roller Assembly Kit B12B813481
100,000
*2
*1 You cannot use any parts except for the codes specied.
*2 This number was reached by consecutively scanning using Epson test original papers, and is a guide to the replacement
cycle. The replacement cycle may vary depending on dierent paper types, such as paper that generates a lot of paper dust
or paper with a rough surface that may shorten the life cycle.
Related Information
& “Replacing the Roller Assembly Kit” on page 51
Cleaning Kit Codes
Use this when cleaning inside the ADF.
is
kit is composed of cleaning liquid and a cleaning cloth.
Part name Codes
Cleaning Kit B12B819291
User's Guide
Scanner Basics
16
To Next Page
Loading...
