Epson DS-5500 - Placing Thick Documents on the Document Glass

c
Important:
Make sure you use the handle when opening or closing the ADF.
Note:
❏ Do not leave photos on the document glass for an extended period of time as they may stick to the glass.
❏ Always keep the document glass clean.
❏ You can place documents up to 15 mm (0.6 inch) thick.
Related Information
& “Scanning from the Button” on page 23
& “Scanning Using Document Capture Pro (Windows)” on page 23
& “Scanning Using Epson Scan 2” on page 34
Placing Thick Documents on the Document Glass
c
Important:
Do not place heavy objects on the document glass and do not press the glass with too much force.
Note:
e illustrations used in this guide are of the ADF scanner.
Follow these steps to scan a large or thick document on the document glass:
1. Place a large or thick document face-down on the document glass. Make sure the top of the document is
against the le edge and centered on the arrow mark.
User's Guide
Specications of Originals and Placing Originals
21