24
Parent topic: Starting a Scan from a Scanner Button
Related tasks
Starting a Scan from a Scanner Button
Changing Default Start Button Settings - Mac
You can view or change the default program and action performed by the start button. You do this
using the Event Manager program.
1. On a Mac, open the Applications folder, click Epson Software, and click Event Manager.
2. Select the scanner you want to use.
3. Change the program and action performed by the start button.
Note: You can also customize the settings used for the selected action by selecting Make Job
Settings and selecting the settings.
4. Click Close to close the Event Manager window.
Parent topic: Starting a Scan from a Scanner Button
Related tasks
Starting a Scan from a Scanner Button
Starting a Scan Using the Epson Scan 2 Icon
You can start the Epson Scan 2 program to select scan settings, scan, and save the scanned image to a
file.
Note: If you are using your Epson product with the Windows 10 S operating system, you cannot use the
software described in this section. You also cannot download and install any Epson product software
from the Epson website for use with Windows 10 S; you must obtain software only from the Windows
Store.
• Windows 10: Click and select EPSON > Epson Scan 2.
• Windows 8.x: Navigate to the Apps screen and select Epson Scan 2.
• Windows (other versions): Click or Start, and select All Programs or Programs. Select EPSON
> Epson Scan 2 > Epson Scan 2.
• Mac: Open the Applications folder, open the Epson Software folder, and select Epson Scan 2.
To Next Page
Loading...
Need help?
General
