Epson DS-60000

59
14. Close the separation roller cover, then close the ADF cover.
15. Plug in the power cord and turn on the scanner.
16. Reset the roller counter after replacing the rollers.
Dispose of the used pickup and separations rollers following the regulations in your local area. Do not
disassemble the rollers.
Resetting the Scanner Roller Counter
Parent topic: Cleaning and Transporting Your Scanner
Resetting the Scanner Roller Counter
When you replace the scanner rollers, reset the scanner roller counter so you know when you may need
to replace the rollers again (DS-60000/DS-70000).
1. Make sure the scanner is turned on and connected to your computer.
2. Do one of the following to open the Epson Scan 2 Utility:
• Windows 10: Click and select EPSON > Epson Scan 2 Utility.
• Windows 8.x: Navigate to the Apps screen and select Epson Scan 2 Utility.
• Windows (other versions): Click or Start > All Programs or Programs > EPSON > Epson
Scan 2 > Epson Scan 2 Utility.
• Mac: Open the Applications folder, click Epson Software, and click Epson Scan 2 Utility.
3. Click the Counter tab.
4. Click Reset.
The Number of Scans field changes to 0 (zero).
5. Close the Epson Scan 2 Utility.
Parent topic: Replacing the Scanner Rollers
Transporting Your Scanner
If you need to ship your product, transport it a long distance, or store it for an extended period, prepare it
for transportation as described here.