Controlling a Networked Projector Using a Web Browser
109
a
• You may need to log in to access some of the options on the
Epson Web Control screen. If you see a log in window, enter
your user name and password.
• When accessing the Basic Control option, the user name is
EPSONREMOTE and the default password is guest.
• When accessing other options, the user name is
EPSONWEB and the default password is admin.
• You can change the password in Web Control Password in
the projector's Network menu.
s Network > Network Configuration > Basic > Web
Control Password
• You can only select the following settings from Advanced.
• Monitor Password (up to 16 alphanumeric characters)
• IPv6 Settings (manual)
• HTTP port (port number used for Web Control except for
80 [default], 843, 3620, 3621, 3625, 3629, 4352, 4649, 5357,
10000, 10001, 41794)
gg Related Links
• "Web Control Options" p.109
• "Projector Setup Settings - ECO Menu" p.147
• "Network Menu - Basic Menu" p.139
• "List of Functions" p.10
Web Control Options
Basic Control
a
• If you see a log in window, enter your user name and password. (The
user name is EPSONREMOTE and the default password is guest.)
• You can change the password in Remote Password in the projector's
Network menu.
s Network > Network Configuration > Basic > Remote Password
A
Returns to the Epson Web Control screen.
B
Turns the projector on or off.
C
Selects the input source.
To Next Page
Loading...
Need help?
General
