Epson E8-992F User Manual

Using ESC/VP21 Commands
117
In the following illustration, the projector side is shown on the left, and the
computer side on the right:
Signal name Function
GND Signal wire ground
TD Transmit data
RD Receive data
Communications protocol
• Default baud rate setting: 9600 bps
• Data length: 8 bit
• Parity: None
• Stop-bit: 1 bit
• Flow control: None

Epson E8-992F Specifications

General

Brand	Epson
Model	E8-992F
Category	Projector
Language	English