Installation Guide
14
Adjustment range for 3-axis adjustment unit installation position
[Unit: mm]
Control Pad
Control Pad (external dimensions/weight)
[Unit: mm]
153.5
149
104
10715.47
135.9
111
3.511.5
109.5
29
30.9
•
Weight: approx. 240 g (not including batteries and rubber feet)
•
Operating temperature: 0 to +50°C (no condensation)
•
Operating temperature: -20 to +60°C (no condensation)
Cable routing holes
When routing cables through a wall, use the position ( ) in the following figure as the cable routing hole.
Otherwise, remove the cable cover (
) and route the cables from there. Route the printer cable along the
groove at the back of the Control Pad.
To Next Page
Loading...
