Front/Top
Name Function
A
Remote Receiver
Receives signals from the remote control.
s Quick Start Guide
B
Lamp cover
Open this cover when replacing the projector's Lamp.
s p.111
C
Lamp Cover Fixing
Screw
Screw to fix the Lamp cover in place. s p.111
D
Air exhaust vent
Exhaust vent for air used to cool the projector internally.
Caution
Do not place anything that can become warped or
damaged by heat near the air exhaust vents, or
bring your hands or face close to the vents while pro‐
jection is in progress.
Name Function
E
Cable cover fixing
screws
Screws to fix the cable cover in place.
s Quick Start Guide
F
Cable cover
When connecting to an input port, loosen the two screws
and open this cover.
s Quick Start Guide
G
Control panel
Allows you to operate and check the status of the
projector. s p.15
H
Speaker
Outputs audio for images currently being projected or
audio from the Microphone (Mic) input port.
Part Names and Functions
11
To Next Page
Loading...
