Basic Menu
Sub Menu Function
Projector Name
Displays the projector name used to identify the projector when connected to a Network.
When editing, you can enter up to 16 single-byte alphanumeric characters.
PJLink Password
Set a Password to use when you access the projector using compatible PJLink software. s p.123
You can enter up to 32 single-byte alphanumeric characters.
Web Control Password
Set a password to use when making settings and controlling the projector using Web Control. You can enter up to 8 single-byte alphanumeric characters.
Web Control is a computer function that allows you to set up and control the projector by using the Web browser on a computer connected on a
Network. s p.63
Projector Keyword
When this is set to On, you are requested to enter the Keyword when you attempt to connect the projector and a computer via a network. As a result,
EasyMP Network Projection can prevent presentations from being interrupted by unscheduled connections from a computer during projection.
Normally, set this to On. s EasyMP Network Projection Operation Guide "Connecting to a Projector on a Network and Projecting"
List of Functions
82
To Next Page
Loading...
