Using Remote Control Using Control panel
q
You can save at a size of 400x300 dots.
E
When the message "Select this image?" is displayed, select
Yes.
F
Select the zoom factor from the zoom setting screen.
G
When the message "Save this image as the User's Logo?" is
displayed, select Yes.
The image is saved. After the image has been saved, the message
"Completed." is displayed.
q
• Once a User's Logo has been saved, the logo cannot be returned to
the factory default.
• Saving the user's logo may take approximately 15 seconds. Do not
use the projector or any connected equipment while it is saving,
otherwise malfunctions may occur.
Saving a User's Logo
69
To Next Page
Loading...
