Sub-menu Function
Source
You can display the source name for the connected
equipment currently being projected.
Input Signal
You can display the content of Input Signal set in the
Signal menu according to the source.
Resolution
You can display the resolution.
Video Signal
You can display the settings for Video Signal in the Signal
menu.
Refresh Rate
You can display the
refresh rate
g
.
Sync Info
You can display the image signal Information.
It may be needed if service is required.
Status
This information is about errors that have occurred with
the projector.
It may be needed if service is required.
Version
Displays the projector's firmware version information.
Serial Number
Displays the projector's serial number.
Event ID
Displays the application error log.
s "About Event ID" p.169
* The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours
and above is displayed as "10H", "11H", and so on.
Reset Menu
Sub-menu Function
Reset All
You can reset all items in the Configuration menu to their default
settings.
The following items are not reset to their defaults: Input Signal,
Zoom, User's Logo, all items in the Network menu, Lamp
Hours, Language, Password, and Image Shift.
Reset Lamp
Hours
Clears the cumulative lamp hours use time. Reset this when you
replace the lamp.
List of Functions
146
To Next Page
Loading...
Need help?
General
