Installing the Touch Unit
107
When the laser is not parallel to the screen
•
The position of your finger may not be detected
even if you touch the projected image.
•
Even if you do not touch the projected image,
touch operations may be incorrectly detected and
unintended operations may be performed.
•
The position of your finger detected by the pro-
jector and your actual finger position may not
align, and an unintended operation may be per-
formed.
•
The projector enters a state in which a touch is
still being detected, and a click operation is not
recognized.
c
Before adjusting the angle of the laser, make sure that interactive pen calibration is complete.
a
Select Touch Unit from the Installation menu
To Next Page
Loading...
