Installing the Touch Unit
112
b
Check the message displayed and take the necessary action
•
If the following screen is displayed, adjust the angle of the laser, and then perform auto adjustment again. For
details, see "Adjusting the angle of the laser" p.112.
•
If a screen other than the above is displayed, check all of the information displayed on the screen. When you
have checked everything, perform Touch Unit Setup (Auto) or Touch Unit Setup (Manual) from the
Installation menu again. For details on manual adjustments, see "Manually adjusting the angle of the laser"
p.114.
c
If the problem continues to occur even after checking all of the items, the Touch Unit may be
malfunctioning. Contact your dealer.
Adjusting the angle of the laser
This section explains how to re-adjust the laser when you see the following screen.
To Next Page
Loading...
