Epson EB-825 - User Manual

Other manuals for Epson EB-825

Questions and Answers

Z
zlawrenceAug 10, 2025
Why is the Epson EB-825 Projector image slow or not displayed when connecting with EMP NS Connection?
- A
  Amy RogersAug 10, 2025
  The display speed may decrease when WEP encryption is enabled or when multiple Epson projectors are connected. Also, if you were trying to play back movies with Media Player or operate the screen saver preview, depending on the computer, the movie playback screen in Media Player may not be displayed, and the screen saver preview may not be displayed normally. If you are using Wireless LAN 802.11g/b in Quick Connection Mode, the image and sound for movies may stop depending on the electromagnetic wave environment. When using the movie sending function, use Advanced Connection Mode or Wireless LAN 802.11a in Quick Connection Mode.
J
jonesdorisAug 15, 2025
How to fix Epson Projector when it cannot connect in Advanced Connection Mode or Wired LAN connection?
- A
  adammcclureAug 15, 2025
  This issue can occur if the SSID setting is different. Ensure that you set the computer, the access point, and the Epson projector to the same SSID. If you are selecting WEP from Security, make sure the access point, the computer, and the projector are set to the same WEP key. Check that the connection denial functions, such as MAC Address restrictions and port restrictions, are set correctly at the access point, and set the projector to allow connections from the access point. If you are not using DHCP, verify that the IP address, the Subnet Mask, and the Gateway Address for the access point and the projector are set correctly. If the access point and the projector's subnet are different, select Manual search from EMP NS Connection, specify the IP address, and connect.
J
Justin WardAug 20, 2025
What to do if Epson Projector image remains and another computer can't connect via EMP NS Connection?
- C
  costajenniferAug 20, 2025
  This can happen if the presenter left the conference room without cutting off the network connection. With EMP NS Connection, the connection with the computer that was previously connected can be cut off when another computer tries to connect with the projector, and it connects with the computer that is trying to connect. Therefore, when a Projector keyword is not set for the Epson projector, or if you know the Projector keyword, you can cut off the current connection and, if you perform a connection operation, you can connect to the projector. When a Projector keyword is set for the projector, if you do not know the Projector keyword, restart the projector and reconnect.
J
joneskimberlyAug 25, 2025
Why is my Epson EB-825 Projector not found when EMP NS Connection is started?
- M
  montgomeryjasonAug 25, 2025
  The projector might not be found if the Wireless LAN unit is not securely connected. Check that the optional Wireless LAN unit is securely connected. Also, while the Configuration Menu is displayed, network connection becomes invalid. Close the Configuration Menu and return to the LAN standby screen. Another reason might be that the computer's LAN card and the built-in LAN function are not available. Check that LAN is valid by checking Control Panel - System in the device manager and so on.
R
Roy MooreAug 30, 2025
What to do if PowerPoint Slide show cannot be started when using Epson EB-825 with EMP NS Connection?
- J
  Jesse GonzalesAug 30, 2025
  If EMP NS Connection was started while PowerPoint was starting, the slide show might not run. When connecting with EMP NS Connection, make sure you close PowerPoint first.
H
Hunter GomezSep 3, 2025
What to do if I cannot start an application while Quick Wireless Connection is running on my Epson EB-825?
- A
  Ashley MccarthySep 4, 2025
  Close Quick Wireless Connection and then start EMP NS Connection.

Epson EB-825 Specifications

General

Display Technology	3LCD
Zoom Ratio	1.2x
Noise Level (ECO mode)	28 dB
Lamp Life (Eco Mode)	10000 hours
Connectivity	HDMI, USB, VGA, RS-232C
Output Terminals	HDMI, VGA