Epson EB-825 - Setting Image Display Conditions

You can set the display condition for the Play Slideshow function.
Procedure
A Press the [ ], [ ], [ ], or [ ] buttons or the [w],
[
v], [a], or [b] buttons on the Control panel to position the
cursor over the folder where you want to set display
conditions and press the [Return] button. Select "Option"
from the menu displayed, then press the [Enter] button.
B Set each of the items.
Enable settings by positioning the cursor on the target item and
pressing the Enter button.
Details of the items are given below.
Display order
You can set the order of the files to be displayed. You
can sort into file name order or date last accessed order.
Continuous
Play
You can determine whether to repeat the Slideshow.
Screen
switching time
You can set the time for a single file to be displayed in
Play Slideshow. You can set a time between No (0) and
60 Seconds. When you set No seconds, auto play is
disabled.
C Press the [ ], [ ], [ ], or [ ] buttons or the [w],
[
v
], [
a
], or [
b
] buttons on the Control panel to position the
cursor over OK and press the [Enter] buttton.
The settings are applied.
If you do not want to apply the settings, position the cursor on
Cancel and press the [Enter] button.
Setting Image Display Conditions
54