Epson EB-825 - Network Settings Are Not Restored after Cutting the Connection to the Computer with EMP NS Connection; Problems Concerning Monitoring and Control; Mail Is Not Sent Even if a Problem Occurs in the Projector

Network settings are not restored after cutting the connection to the computer with EMP NS Connection.
Check Remedy
Are you manually connecting to a Wireless LAN when the
computer starts up?
Quick Connection Mode
Try connecting to the Wireless LAN manually.
Problems concerning monitoring and control
Mail is not sent even if a problem occurs in the projector.
Check Remedy
Is the Wireless LAN unit connected?
For Wireless LAN
Check that the optional Wireless LAN unit is securely connected.
Is the network connect setting correct?
Check the projector's network settings. s User's Guide "Network Menu (EB-826W/825/85/84 only)"
Is Standby Mode set to Network On? To use the Mail Notification function when the projector is in standby, set Network On in Standby Mode from
the Configuration Menu. s User's Guide "Extended Menu"
Did a fatal abnormality occur and the projector come to a
sudden stop?
When the projector comes to a sudden stop, mail cannot be sent.
If, after checking the projector, the abnormal state continues, contact your local dealer or the nearest address
provided in the Support and Service Guide. s Epson Projector Contact List
Is power being supplied to the projector? Check that your electrical outlet or power source is functioning correctly.
Is the network cable connected correctly?
For Wired LAN
Check that the network cable is connected correctly. Reconnect it if it is not connected or not connected properly.
Troubleshooting
64