By setting
SNMP
from the projector's Configuration Menu, notification
messages are sent to preset e-mail addresses when a problem or
warning occurs with a projector. This is useful when controlling
projectors collectively at a point distant from them.
s User's Guide "Network Menu (EB-826W/825/85/84 only)",User's Guide
"Others Menu"
q
• SNMP should be managed by a network administrator or
someone who is familiar with the network.
• The SNMP function to monitor projectors requires SNMP
Manager to be installed on the computer.
• The managing function using
SNMP
cannot be used via a
Wireless LAN in Quick Connection Mode.
• Up to two destination IP addresses can be saved.
Management Using SNMP
46
To Next Page
Loading...
