D
The following operation returns you to the file list.
• While projecting still images: Press the [Esc] button.
Projecting all Image Files in a Folder in
Sequence (Slideshow)
You can project the image files in a folder in sequence, one at a time.
This function is called Slideshow. Perform the Slideshow by the
following procedure.
q
To change the files automatically when you run Slideshow, set the
Screen switching time in the Slideshow Option menu to anything
other than No. Default setting: No s p.54
Procedure
A
Start Slideshow. s p.49
The content of the connected digital camera or USB storage
device is displayed.
B
Press the [ ], [ ], [ ], or [ ] buttons or the [w],
[
v], [a], or [b] buttons on the Control panel to position the
cursor over the folder for Slideshow, and then press the
[Enter] button.
C
Select Slideshow from the file list screen, and then press the
[Enter] button.
The Slideshow starts.
When the last file is projected, the file list is displayed again
automatically. If you set Continuous Play to On in the Option
window, projection will start from the beginning again when the
end is reached.
s p.54
You can proceed to the next screen, return to the previous
screen, or stop playback during the projection of a Slideshow.
q
If the Screen switching time setting has been set to No, the files
will not change automatically when you Play Slideshow. Press the
[Enter] or [d] button on the Remote Control to continue to the
next file.
Projecting Image Files
53
To Next Page
Loading...
