q
Check the following points before starting EMP NS Connection
when connecting via Wireless LAN. If the following points are not
set correctly, Multi-screen display cannot be used.
• The SSID for the computer and each projector must be the same.
• The Wireless LAN system for the computer and each projector's
Wireless LAN card must be the same.
You can modify the SSID and Wireless LAN system for the
projector from the Network menu in the projector's
Configuration Menu. s User's Guide "Wireless LAN Menu
(EB-826W/825/85 only)"
Procedure
For Windows
A
Select "Start" - "Programs" (or All Programs) -
"EPSON Projector" - EMP NS Connection to start EMP NS
Connection.
B
Select the "Use multi-display" check box.
Display layout and Display properties are added at the bottom of
the screen.
Using Multi-Screen Display
25
To Next Page
Loading...
