Submenu Function
Sync Info
You can display the image signal information.
This information may be needed if service is required.
Video Signal
You can display the settings for Video Signal in the Signal
menu.
Status
This is information about errors that have occurred on the
projector.
This information may be needed if service is required.
Serial Number
Displays the projector's serial number.
Version
Displays the projector's firmware version.
Event ID
Displays the application error log.
s "About Event ID" p.80
* The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours
and above is displayed as "10H", "11H", and so on.
Reset Menu
Submenu Function
Reset All
You can reset all items in the Configuration menu to their default
settings.
The following items are not reset to their defaults: Input Signal,
User's Logo, Lamp Hours, Language, Password, and all items
on the Network menu.
Reset Lamp
Hours
Clears the cumulative lamp hours use time. Reset when you
replace the lamp.
List of Functions
101
To Next Page
Loading...
