Epson EB-965 - Notes on Operating the Network Menu; Soft Keyboard Operations

Notes on operating the Network menu
Selecting from the top menu and sub menus, and changing selected items is
the same as making operations from the Configuration menu.
When done, make sure you go to the Complete menu, and select Yes, No,
or Cancel. When you select Yes or No, you are returned to the
Configuration menu.
Yes: Saves the settings and exits the Network menu.
No: Does not save the settings and exits the Network menu.
Cancel: Continues displaying the Network menu.
Soft keyboard operations
The Network menu contains items that require input of alphanumerics
during setup. In this case, the following software keyboard is displayed.
Press the [
][ ][ ][ ] buttons on the remote control or the [
w
][
v
]
[
a
][
b
] buttons on the control panel. Use the buttons to move the cursor to
the desired key, and then press the [
] button. Enter figures by holding
down the [Num] button on the remote control, and pressing the numeric
buttons. After inputting, press Finish on the keyboard to confirm your
input. Press Cancel on the keyboard to cancel your input.
• Each time the CAPS key is selected and the [ ] button is pressed, it
sets and changes between upper case and lower case letters.
• Each time the SYM1/2 key is selected and the [
] button is pressed, it
sets and changes the symbol keys for the section enclosed by the frame.
List of Functions
92