Using the Remote Control to Operate the Mouse
Pointer (Wireless Mouse)
You can control the computer's mouse pointer from the projector's remote
control. This function is called Wireless Mouse.
The following operating systems are compatible with Wireless Mouse.
Windows Mac OS
OS
Windows 98
Windows 98SE
Windows Me
Windows 2000
Windows XP
Windows Vista
Windows 7
Mac OS X 10.3.x
Mac OS X 10.4.x
Mac OS X 10.5.x
Mac OS X 10.6.x
* It may not be possible to use the Wireless Mouse function under some
versions of the operating systems.
Use the following procedure to enable the Wireless Mouse function.
a
Connect the projector to a computer using one of the following
cables.
• A computer cable or a commercially available HDMI cable
• A commercially available USB cable
s "Connecting a Computer" p.22
b
Change the source to one of the following.
• Computer1
• Computer2
• HDMI
s "Switching to the Target Image by Remote Control" p.32
c
Set USB Type B to Wireless Mouse.
s Extended - Wireless Mouse p.81
Once set, the mouse pointer can be controlled as follows.
Moving the mouse pointer
[ ][ ][ ][ ] buttons:
Moves the mouse pointer.
Mouse clicks
[Enter] button: Left click. Press quickly twice
to double-click.
[Esc] button: Right click.
Drag and drop
While holding down the [Enter] button,
press the [
], [ ], [ ], and
[
] buttons.
Release the [Enter] button to drop at the
desired location.
Projection Functions
54
To Next Page
Loading...
Need help?
General
