EasyManuals Logo

Epson EB-E20 User Manual

Epson EB-E20
210 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
Projector Connections
32
b
Connect the USB cable or USB flash drive to the projector's USB-A port
as shown.
Attention
Use the USB cable supplied with or specified for use with the device.
Do not connect a USB hub or a USB cable longer than 3 meters, or the
device may not operate correctly.
c
Connect the other end to your device, if necessary.
gg Related Links
"List of Functions" p.10
Disconnecting a USB Device
When you have finished presenting with a connected USB device, disconnect
the device from the projector.
a
Turn off and unplug the device, if necessary.
b
Disconnect the USB device from the projector.
Connecting to a Document Camera
You can connect a document camera to your projector to project images
viewed by the camera.
The connection method varies depending on your Epson document camera
model. See the document camera manual for details.
gg Related Links
"List of Functions" p.10
Connecting to External Devices
Follow the instructions in these sections to connect external devices to the
projector.
gg Related Links
"Connecting to a VGA Monitor" p.32
"Connecting to External Speakers" p.33
"Connecting a Microphone" p.34
Connecting to a VGA Monitor
If you connected the projector to a computer using a Computer port, you can
also connect an external monitor to the projector. This lets you see your
presentation on the external monitor even when the projected image is not
visible.
a
If you want to output images to an external monitor when the
projector is turned off, select Always On as the A/V Output setting
in the projector's Extended menu.
s Extended > A/V Settings > A/V Output
Monitors that use a refresh rate of less than 60 Hz may not be able to
display images correctly.
a
Make sure your computer is connected to the projector's Computer
port.

Table of Contents

Other manuals for Epson EB-E20

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-E20 and is the answer not in the manual?

Epson EB-E20 Specifications

General IconGeneral
Matrix size0.55 \
Number of colors1.073 billion colors
Native aspect ratio4:3
Projection distance- m
Vertical scan range100 - 120 Hz
Projection technology3LCD
Contrast ratio (typical)15000:1
Screen size compatibility30 - 350 \
Projector native resolutionXGA (1024x768)
Keystone correction, horizontal-30 - 30 °
RMS rated power5 W
Number of built-in speakers1
PlacementDesktop, Ceiling
Product typeStandard throw projector
Product colorWhite
Market positioningPortable
Cable lock slot typeKensington
Lamp typeUHE
Lamp power210 W
Light source typeLamp
Service life of light source6000 h
Service life of light source (economic mode)12000 h
Built-in displayNo
Noise level37 dB
Preset modesBlackboard, Dynamic, Presentation, Theatre, sRGB
Noise level (economic mode)28 dB
FocusManual
Throw ratio1.44 - 1.95:1
Fixed focal length16.7 mm
Focal length range- mm
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)- W
Power consumption (typical)327 W
Power consumption (economy mode)225 W
Analog signal format system-
HDMI connector typeFull-size
Serial interface typeRS-232C
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
VGA (D-Sub) ports quantity3
Component video (YPbPr/YCbCr) in0
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)5 - 40 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 80 %
Cables includedAC, VGA
Harmonized System (HS) code85286200
Weight and Dimensions IconWeight and Dimensions
Depth282 mm
Width309 mm
Height87 mm
Weight2700 g

Related product manuals