Saving a User Pattern
78
There are four types of patterns pre-registered in the projector, such as ruled
lines and grid patterns. You can project these patterns to aid in presentations
using the Pattern Display settings.
You can also save the image that is currently being projected as a User
Pattern.
a
Once you save a User Pattern, the pattern cannot be returned to the
factory default.
a
Project the image you want to save as the User Pattern, and then press
the [Menu] button on the control panel or remote control.
b
Select the Settings menu and press [Enter].
c
Select Pattern > User Pattern and press [Enter].
You see a prompt asking if you want to use the displayed image as a
User Pattern.
a
• Adjustments such as Keystone, E-Zoom, or Aspect are
temporarily cancelled when you select User Pattern.
• You cannot save digital images protected by HDCP technology
as a User Pattern.
d
Select Yes and press [Enter].
You see a prompt asking if you want to save the image as the User
Pattern.
e
Select Yes and press [Enter].
You see a completion message.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
