Epson EB-G6750WU - Projecting Images; Automatically Detect Input Signals and Change the Projected Image (Source Search)

Automatically Detect Input Signals and Change
the Projected Image (Source Search)
Press the [Search] button on the remote control or the [Source Search]
button on the control panel to project images from the port currently
receiving an image.
Using the remote control Using the control panel
*EB-G6750WU only
When two or more image sources are connected, press the [Search] button
on the remote control or the [Source Search] button on the control panel
until the target image is projected.
When your video equipment is connected, start playback before beginning
this operation.
a
The following screen is displayed while no image signals are input.
Projecting Images
41