Epson EB-G6750WU - Frame Interpolation (EB-G6750 WU;EB-G6650 WU;EB-G6550 WU;EB-G6450 WU only)

Move the cursor on the projected image to the part where you want to
change the brightness, then press the [
] button. Use the [ ][ ] buttons
to adjust the value.
Adjust using the gamma adjustment graph
s
Image - Advanced - Gamma - Customized - Adjust it from the graph
p.81
Adjust while looking at the gamma adjustment graph.
Frame Interpolation (EB-G6750WU/EB-G6650WU/EB-G6550WU/EB-
G6450WU only)
The current and previous frames are used to create intermediate frames,
interpolating to produce smooth-moving images. You can resolve clumsy-
moving images, such as frame skipping when projecting a fast moving
image.
Make settings from the configuration menu.
s
Signal - Frame Interpolation p.82
Adjusting Projected Images
50