Epson EB-L775U User Manual

177
Related references
Projector Setup Settings - Extended Menu
Projector Information Display - Info Menu
Saving Settings to a USB Flash Drive
You can save the projector settings you want to transfer to a USB flash drive.
Note: Use an empty flash drive. If the drive contains other files, the transfer may not complete correctly.
The flash drive must use the FAT format and cannot have any security features.
1. Turn off the projector and unplug the power cord from the projector's power inlet.
2. Insert the flash drive into the USB-A port.
Note: Connect the flash drive directly to the projector. Do not use a hub or your settings may not be
saved correctly.
3. Press and hold the Esc button on the control panel or remote control as you connect the power cord
to the projector's power inlet.
4. When all of the projector lights turn on, release the Esc button.

Epson EB-L775U Specifications

General

Projection System	3LCD
Native Resolution	WUXGA (1920 x 1200)
Brightness	7, 000 lumens
Contrast Ratio	2, 500, 000:1
Light Source	Laser
Laser Life	20, 000 hours
Color Reproduction	Up to 1.07 billion colors
Speaker	16 W
Keystone Correction	Vertical: ±30°, Horizontal: ±30°
Interfaces	USB, RS-232C, LAN
Wireless	Optional
Power Consumption	0.3 W (Standby)
Noise Level	37 dB (Normal mode)
Weight	12.5 kg
Lens Shift	Vertical: ±60%, Horizontal: ±24%