Epson EB-L775U User Manual

81
Note: You cannot use the Message Broadcasting feature in the Epson Projector Management software
when you use Crestron Connected.
For additional information on Crestron Connected, contact Crestron.
Setting Up Crestron Connected
Controlling a Networked Projector Using Crestron Connected
Parent topic: Using the Projector on a Network
Setting Up Crestron Connected
To set up your projector for monitoring and control using a Crestron Connected system, make sure your
computer and projector are connected to the network.
Note: If you want to use the Crestron Connected system when the projector is turned off, you need to
adjust the Standby Mode settings in the Extended menu.
Note: If you are connecting wirelessly, set up the projector using the Advanced network connection
mode.
1. Press the Menu button.
2. Select the Network menu and press Enter.
3. Select Network Configuration and press Enter.
4. Select the Others menu and press Enter.

Epson EB-L775U Specifications

General

Projection System	3LCD
Native Resolution	WUXGA (1920 x 1200)
Brightness	7, 000 lumens
Contrast Ratio	2, 500, 000:1
Light Source	Laser
Laser Life	20, 000 hours
Color Reproduction	Up to 1.07 billion colors
Speaker	16 W
Keystone Correction	Vertical: ±30°, Horizontal: ±30°
Interfaces	USB, RS-232C, LAN
Wireless	Optional
Power Consumption	0.3 W (Standby)
Noise Level	37 dB (Normal mode)
Weight	12.5 kg
Lens Shift	Vertical: ±60%, Horizontal: ±24%