Epson EB-L775U User Manual

251
• If your Web browser is set up to connect via a proxy server, the Epson Web Control screen cannot
be displayed. Make settings for a connection without using a proxy server.
• If you set Standby Mode to Communication On in the projector's Extended menu, make sure the
network device is turned on. After turning on the network device, turn on the projector.
• Connect to a wired LAN, or to a wireless LAN with the Connection Mode setting set to Advanced.
Note: The user ID and password are case sensitive.
Parent topic: Solving Network Problems
Related references
Projector Network Settings - Network Menu
Solutions When Network Alert E-Mails are Not Received
If you do not receive an e-mail alerting you to problems with a projector over the network, try the
following solutions:
• Make sure the projector is turned on and connected to the network correctly. (If an error shut down the
projector, it cannot send an e-mail.)
• Make sure you set up the projector e-mail alert settings correctly on the projector's Network
Notifications menu or in the network software.
• Set the Standby Mode setting to Communication On so the network software can monitor the
projector in standby mode. Connect to a wired LAN, or to a wireless LAN with the Connection Mode
setting set to Advanced.Change the Port setting according to your network environment.
Parent topic: Solving Network Problems
Related references
Projector Network Settings - Network Menu
Solutions When the Image Contains Static During Network Projection
If the projected image contains static during network projection, try the following solutions:
• Check for any obstacles between the access point, the computer, the mobile device, and the projector.
If necessary, change their positions to improve communication. Also make sure that they are not too
far apart; move them closer together and try to connect again.
• If the wireless connection is slow or your projected image contains noise, check for interference from
other equipment, such as a Bluetooth device or microwave. Move the interfering device farther away
or expand your wireless bandwidth.

Epson EB-L775U Specifications

General

Projection System	3LCD
Native Resolution	WUXGA (1920 x 1200)
Brightness	7, 000 lumens
Contrast Ratio	2, 500, 000:1
Light Source	Laser
Laser Life	20, 000 hours
Color Reproduction	Up to 1.07 billion colors
Speaker	16 W
Keystone Correction	Vertical: ±30°, Horizontal: ±30°
Interfaces	USB, RS-232C, LAN
Wireless	Optional
Power Consumption	0.3 W (Standby)
Noise Level	37 dB (Normal mode)
Weight	12.5 kg
Lens Shift	Vertical: ±60%, Horizontal: ±24%