Epson EB-PU2213B - Solutions to Problems Using Content Playback

294
• Set the Standby Mode setting to Communication On so the network software can monitor the
projector in standby mode. Connect to a wired LAN, or to a wireless LAN with the Connection Mode
setting set to Advanced.
Parent topic: Solving Network Problems
Related references
Projector Setup Settings - Extended Menu
Projector Network Settings - Network Menu
Solutions to Problems Using Content Playback
If you cannot play back a playlist correctly, try the following solutions:
• Check the following on all projectors:
• All projectors are the same model. If any of the projectors are a different model or have a different
resolution, synchronized playback may not be performed properly.
• Make sure the name, date, and time settings are correct.
• Make sure all projectors are connected to the same network.
• Make sure the Content Playback setting is turned on in the Settings menu.
• Make sure your USB device contains a playlist.
• Make sure your USB device is connected directly to the projector and not through a USB hub or card
reader.
• If the USB device is partitioned, you may not be able to play back playlists. Delete all of the partitions
before saving the playlists on your USB device.
• Do not share a playlist between projectors that are different in resolution. Color and shape effects
added by using the Overlay Effect setting may not be reproduced correctly.
Parent topic: Solving Problems
Related references
Projector Feature Settings - Settings Menu
Related tasks
Setting the Date and Time
Controlling a Networked Projector in Content Playback Mode
Related topics
Projecting in Content Playback Mode