Indicators Cause Remedy or Status
Power sup‐
ply
Status Lamp Tempera‐
ture
Blue - Flash‐
ing
State de‐
pendant in‐
dication
Orange -
Flashing
State de‐
pendant in‐
dication
Replace Lamp Replace it with a new lamp.
s "Replacing the Lamp" p.108
If you continue to use the lamp after the replacement period has passed, the possibility that the lamp
may explode increases. Replace it with a new lamp as soon as possible.
a
• See the following if the projector is not operating properly, even though the indicators are all showing normal.
s "When the Indicators Provide No Help" p.95
• If the indicators are in a state not shown in this table, stop using the projector, remove the power plug from the electrical outlet, and contact your local dealer or
the nearest address provided in the Epson Projector Contact List.
s Epson Projector Contact List
Problem Solving
94
To Next Page
Loading...
Need help?
General
